{"title":"VR5 Komplettdichtung","description":"\u003cp\u003eHier findest du Komplettdichtungen zur Verdichtungsreduzierung für ausgewählte VW V5 beziehungsweise VR5 Motoren, unter anderem mit den Motorcodes AQN und AZX. Die Varianten sind nach Zielverdichtung gegliedert.\u003c\/p\u003e\u003cp\u003ePrüfe vor der Bestellung die Angaben zu Fahrzeug, Motorcode, Abmessungen, Ausführung und Lieferumfang im jeweiligen Produkt. Bei Motor- und sicherheitsrelevanten Umbauten sollten Auswahl und Montage durch einen Fachbetrieb erfolgen.\u003c\/p\u003e","products":[{"product_id":"vw-vr5-zylinderkopfdichtung-fur-agz-verdichtungsreduzierung-9-35-1","title":"VW VR5 Cylinder Head Gasket for AGZ with Compression Reduction 9.35:1","description":"\u003cp\u003eIntegrated compression-reduction turbo MLS cylinder head gasket and complete solution for the VW VR5 AGZ engine.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eManufacturer: WP-Spezialteile \/ Reinz\u003c\/li\u003e\u003cli\u003eTotal thickness: 1.6 mm\u003c\/li\u003e\u003cli\u003eCompression ratio: 9.35:1 (standard: 10.2:1)\u003c\/li\u003e\u003cli\u003eReusable spacer\u003c\/li\u003e\u003cli\u003eIncludes timing-chain tensioner sleeve\u003c\/li\u003e\u003cli\u003eMade in Germany\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis solution is simpler than using two cylinder head gaskets and a separate spacer. It is intended only for VR5 turbo or supercharger conversions. A thicker cylinder head gasket reduces the compression ratio and can help create a suitable basis for forced induction. Please ensure that the selected thickness matches your engine setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVR5 compression ratios:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e0.6 mm standard: 10.2:1\u003c\/li\u003e\u003cli\u003e1.6 mm: 9.35:1\u003c\/li\u003e\u003cli\u003e2.1 mm: 8.98:1\u003c\/li\u003e\u003cli\u003e2.6 mm: 8.64:1\u003c\/li\u003e\u003cli\u003e3.1 mm: 8.33:1\u003c\/li\u003e\u003cli\u003e3.6 mm: 8.04:1\u003c\/li\u003e\u003cli\u003e4.6 mm: 7.53:1\u003c\/li\u003e\u003c\/ul\u003e\u003cdiv data-wp-safety=\"general-v1\"\u003e\u003chr\u003e\u003ch3\u003eSafety and usage instructions\u003c\/h3\u003e\u003cp\u003eBefore installation and use, please read the \u003ca href=\"\/en\/pages\/allgemeine-sicherheits-und-gebrauchshinweise\"\u003egeneral safety and usage instructions\u003c\/a\u003e and the product-specific information in this description.\u003c\/p\u003e\u003c\/div\u003e","brand":"WP-Spezialteile","offers":[{"title":"Default Title","offer_id":49899917705556,"sku":"55951411","price":107.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/0063\/7780\/files\/V5verdichtungsreduzierung_37919895-2fc1-4dd7-9229-9a960527843f.jpg?v=1742175551"},{"product_id":"vw-vr5-zylinderkopfdichtung-fur-agz-mit-verdichtungsreduzierung-8-98-1","title":"VW VR5 Cylinder Head Gasket for AGZ with Compression Reduction 8.98:1","description":"\u003cp\u003eIntegrated compression-reduction turbo MLS cylinder head gasket and complete solution for the VW VR5 AGZ engine.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eManufacturer: WP-Spezialteile \/ Reinz\u003c\/li\u003e\u003cli\u003eTotal thickness: 2.1 mm\u003c\/li\u003e\u003cli\u003eCompression ratio: 8.98:1 (standard: 10.2:1)\u003c\/li\u003e\u003cli\u003eReusable spacer\u003c\/li\u003e\u003cli\u003eIncludes timing-chain tensioner sleeve\u003c\/li\u003e\u003cli\u003eMade in Germany\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis solution is simpler than using two cylinder head gaskets and a separate spacer. It is intended only for VR5 turbo or supercharger conversions. A thicker cylinder head gasket reduces the compression ratio and can help create a suitable basis for forced induction. Please ensure that the selected thickness matches your engine setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVR5 compression ratios:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e0.6 mm standard: 10.2:1\u003c\/li\u003e\u003cli\u003e1.6 mm: 9.35:1\u003c\/li\u003e\u003cli\u003e2.1 mm: 8.98:1\u003c\/li\u003e\u003cli\u003e2.6 mm: 8.64:1\u003c\/li\u003e\u003cli\u003e3.1 mm: 8.33:1\u003c\/li\u003e\u003cli\u003e3.6 mm: 8.04:1\u003c\/li\u003e\u003cli\u003e4.6 mm: 7.53:1\u003c\/li\u003e\u003c\/ul\u003e\u003cdiv data-wp-safety=\"general-v1\"\u003e\u003chr\u003e\u003ch3\u003eSafety and usage instructions\u003c\/h3\u003e\u003cp\u003eBefore installation and use, please read the \u003ca href=\"\/en\/pages\/allgemeine-sicherheits-und-gebrauchshinweise\"\u003egeneral safety and usage instructions\u003c\/a\u003e and the product-specific information in this description.\u003c\/p\u003e\u003c\/div\u003e","brand":"WP-Spezialteile","offers":[{"title":"Default Title","offer_id":49899918655828,"sku":"55951412","price":111.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/0063\/7780\/files\/V5verdichtungsreduzierung_da480e98-9eed-4319-92ae-99b7cab20341.jpg?v=1742175552"},{"product_id":"vw-vr5-zylinderkopfdichtung-fur-agz-mit-verdichtungsreduzierung-8-64-1","title":"VW VR5 Cylinder Head Gasket for AGZ with Compression Reduction 8.64:1","description":"\u003cp\u003eIntegrated compression-reduction turbo MLS cylinder head gasket and complete solution for the VW VR5 AGZ engine.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eManufacturer: WP-Spezialteile \/ Reinz\u003c\/li\u003e\u003cli\u003eTotal thickness: 2.6 mm\u003c\/li\u003e\u003cli\u003eCompression ratio: 8.64:1 (standard: 10.2:1)\u003c\/li\u003e\u003cli\u003eReusable spacer\u003c\/li\u003e\u003cli\u003eIncludes timing-chain tensioner sleeve\u003c\/li\u003e\u003cli\u003eMade in Germany\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis solution is simpler than using two cylinder head gaskets and a separate spacer. It is intended only for VR5 turbo or supercharger conversions. A thicker cylinder head gasket reduces the compression ratio and can help create a suitable basis for forced induction. Please ensure that the selected thickness matches your engine setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVR5 compression ratios:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e0.6 mm standard: 10.2:1\u003c\/li\u003e\u003cli\u003e1.6 mm: 9.35:1\u003c\/li\u003e\u003cli\u003e2.1 mm: 8.98:1\u003c\/li\u003e\u003cli\u003e2.6 mm: 8.64:1\u003c\/li\u003e\u003cli\u003e3.1 mm: 8.33:1\u003c\/li\u003e\u003cli\u003e3.6 mm: 8.04:1\u003c\/li\u003e\u003cli\u003e4.6 mm: 7.53:1\u003c\/li\u003e\u003c\/ul\u003e\u003cdiv data-wp-safety=\"general-v1\"\u003e\u003chr\u003e\u003ch3\u003eSafety and usage instructions\u003c\/h3\u003e\u003cp\u003eBefore installation and use, please read the \u003ca href=\"\/en\/pages\/allgemeine-sicherheits-und-gebrauchshinweise\"\u003egeneral safety and usage instructions\u003c\/a\u003e and the product-specific information in this description.\u003c\/p\u003e\u003c\/div\u003e","brand":"WP-Spezialteile","offers":[{"title":"Default Title","offer_id":49899919049044,"sku":"55951413","price":116.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/0063\/7780\/files\/V5verdichtungsreduzierung.jpg?v=1742175553"},{"product_id":"vw-vr5-zylinderkopfdichtung-fur-agz-mit-verdichtungsreduzierung-8-33-1","title":"VW VR5 Cylinder Head Gasket for AGZ with Compression Reduction 8.33:1","description":"\u003cp\u003eIntegrated compression-reduction turbo MLS cylinder head gasket and complete solution for the VW VR5 AGZ engine.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eManufacturer: WP-Spezialteile \/ Reinz\u003c\/li\u003e\u003cli\u003eTotal thickness: 3.1 mm\u003c\/li\u003e\u003cli\u003eCompression ratio: 8.33:1 (standard: 10.2:1)\u003c\/li\u003e\u003cli\u003eReusable spacer\u003c\/li\u003e\u003cli\u003eIncludes timing-chain tensioner sleeve\u003c\/li\u003e\u003cli\u003eMade in Germany\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis solution is simpler than using two cylinder head gaskets and a separate spacer. It is intended only for VR5 turbo or supercharger conversions. A thicker cylinder head gasket reduces the compression ratio and can help create a suitable basis for forced induction. Please ensure that the selected thickness matches your engine setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVR5 compression ratios:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e0.6 mm standard: 10.2:1\u003c\/li\u003e\u003cli\u003e1.6 mm: 9.35:1\u003c\/li\u003e\u003cli\u003e2.1 mm: 8.98:1\u003c\/li\u003e\u003cli\u003e2.6 mm: 8.64:1\u003c\/li\u003e\u003cli\u003e3.1 mm: 8.33:1\u003c\/li\u003e\u003cli\u003e3.6 mm: 8.04:1\u003c\/li\u003e\u003cli\u003e4.6 mm: 7.53:1\u003c\/li\u003e\u003c\/ul\u003e\u003cdiv data-wp-safety=\"general-v1\"\u003e\u003chr\u003e\u003ch3\u003eSafety and usage instructions\u003c\/h3\u003e\u003cp\u003eBefore installation and use, please read the \u003ca href=\"\/en\/pages\/allgemeine-sicherheits-und-gebrauchshinweise\"\u003egeneral safety and usage instructions\u003c\/a\u003e and the product-specific information in this description.\u003c\/p\u003e\u003c\/div\u003e","brand":"WP-Spezialteile","offers":[{"title":"Default Title","offer_id":49899920425300,"sku":"55951414","price":121.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/0063\/7780\/files\/V5verdichtungsreduzierung_12c96b81-6159-45f8-a2bb-411016b84665.jpg?v=1742175554"},{"product_id":"vw-vr5-zylinderkopfdichtung-fur-agz-mit-verdichtungsreduzierung-8-04-1","title":"VW VR5 Cylinder Head Gasket for AGZ with Compression Reduction 8.04:1","description":"\u003cp\u003eIntegrated compression-reduction turbo MLS cylinder head gasket and complete solution for the VW VR5 AGZ engine.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eManufacturer: WP-Spezialteile \/ Reinz\u003c\/li\u003e\u003cli\u003eTotal thickness: 3.6 mm\u003c\/li\u003e\u003cli\u003eCompression ratio: 8.04:1 (standard: 10.2:1)\u003c\/li\u003e\u003cli\u003eReusable spacer\u003c\/li\u003e\u003cli\u003eIncludes timing-chain tensioner sleeve\u003c\/li\u003e\u003cli\u003eMade in Germany\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis solution is simpler than using two cylinder head gaskets and a separate spacer. It is intended only for VR5 turbo or supercharger conversions. A thicker cylinder head gasket reduces the compression ratio and can help create a suitable basis for forced induction. Please ensure that the selected thickness matches your engine setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVR5 compression ratios:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e0.6 mm standard: 10.2:1\u003c\/li\u003e\u003cli\u003e1.6 mm: 9.35:1\u003c\/li\u003e\u003cli\u003e2.1 mm: 8.98:1\u003c\/li\u003e\u003cli\u003e2.6 mm: 8.64:1\u003c\/li\u003e\u003cli\u003e3.1 mm: 8.33:1\u003c\/li\u003e\u003cli\u003e3.6 mm: 8.04:1\u003c\/li\u003e\u003cli\u003e4.6 mm: 7.53:1\u003c\/li\u003e\u003c\/ul\u003e\u003cdiv data-wp-safety=\"general-v1\"\u003e\u003chr\u003e\u003ch3\u003eSafety and usage instructions\u003c\/h3\u003e\u003cp\u003eBefore installation and use, please read the \u003ca href=\"\/en\/pages\/allgemeine-sicherheits-und-gebrauchshinweise\"\u003egeneral safety and usage instructions\u003c\/a\u003e and the product-specific information in this description.\u003c\/p\u003e\u003c\/div\u003e","brand":"WP-Spezialteile","offers":[{"title":"Default Title","offer_id":49899921834324,"sku":"55951415","price":126.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/0063\/7780\/files\/V5verdichtungsreduzierung_d3373993-356a-49be-a6d6-1b0bfa1137c2.jpg?v=1742175555"},{"product_id":"vw-vr5-zylinderkopfdichtung-fur-agz-mit-verdichtungsreduzierung-7-53-1","title":"VW VR5 Cylinder Head Gasket for AGZ with Compression Reduction 7.53:1","description":"\u003cp\u003eIntegrated compression-reduction turbo MLS cylinder head gasket and complete solution for the VW VR5 AGZ engine.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eManufacturer: WP-Spezialteile \/ Reinz\u003c\/li\u003e\u003cli\u003eTotal thickness: 4.6 mm\u003c\/li\u003e\u003cli\u003eCompression ratio: 7.53:1 (standard: 10.2:1)\u003c\/li\u003e\u003cli\u003eReusable spacer\u003c\/li\u003e\u003cli\u003eIncludes timing-chain tensioner sleeve\u003c\/li\u003e\u003cli\u003eMade in Germany\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThis solution is simpler than using two cylinder head gaskets and a separate spacer. It is intended only for VR5 turbo or supercharger conversions. A thicker cylinder head gasket reduces the compression ratio and can help create a suitable basis for forced induction. Please ensure that the selected thickness matches your engine setup.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVR5 compression ratios:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e0.6 mm standard: 10.2:1\u003c\/li\u003e\u003cli\u003e1.6 mm: 9.35:1\u003c\/li\u003e\u003cli\u003e2.1 mm: 8.98:1\u003c\/li\u003e\u003cli\u003e2.6 mm: 8.64:1\u003c\/li\u003e\u003cli\u003e3.1 mm: 8.33:1\u003c\/li\u003e\u003cli\u003e3.6 mm: 8.04:1\u003c\/li\u003e\u003cli\u003e4.6 mm: 7.53:1\u003c\/li\u003e\u003c\/ul\u003e\u003cdiv data-wp-safety=\"general-v1\"\u003e\u003chr\u003e\u003ch3\u003eSafety and usage instructions\u003c\/h3\u003e\u003cp\u003eBefore installation and use, please read the \u003ca href=\"\/en\/pages\/allgemeine-sicherheits-und-gebrauchshinweise\"\u003egeneral safety and usage instructions\u003c\/a\u003e and the product-specific information in this description.\u003c\/p\u003e\u003c\/div\u003e","brand":"WP-Spezialteile","offers":[{"title":"Default Title","offer_id":49899922850132,"sku":"55951416","price":132.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/0063\/7780\/files\/V5verdichtungsreduzierung_ccf6535e-5fb7-41b1-850f-6bcc5a95c2c3.jpg?v=1742175555"},{"product_id":"vw-vr6-kettenspannerhulse-edelstahl-in-3mm","title":"VW VR6 Stainless Steel Timing-Chain Tensioner Sleeve 3 mm","description":"\u003cp\u003eTiming-chain tensioner sleeve for VW VR6 turbo conversions using compression-reduction plates.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSleeve material: stainless steel\u003c\/li\u003e\u003cli\u003eSleeve thickness: 3 mm\u003c\/li\u003e\u003cli\u003eIncludes two copper gaskets, 1 mm each\u003c\/li\u003e\u003cli\u003eTotal thickness: 5 mm\u003c\/li\u003e\u003cli\u003eScope of delivery: 1 sleeve and 2 copper gaskets\u003c\/li\u003e\u003cli\u003eMade in Germany\u003c\/li\u003e\u003c\/ul\u003e\u003cdiv data-wp-safety=\"general-v1\"\u003e\u003chr\u003e\u003ch3\u003eSafety and usage instructions\u003c\/h3\u003e\u003cp\u003eBefore installation and use, please read the \u003ca href=\"\/en\/pages\/allgemeine-sicherheits-und-gebrauchshinweise\"\u003egeneral safety and usage instructions\u003c\/a\u003e and the product-specific information in this description.\u003c\/p\u003e\u003c\/div\u003e","brand":"WP-Spezialteile","offers":[{"title":"Default Title","offer_id":49899925569876,"sku":"55951425","price":8.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/0063\/7780\/files\/kettenspanner.jpg?v=1742175559"},{"product_id":"vw-vr6-kettenspannerhulse-edelstahl-in-4mm","title":"VW VR6 Stainless Steel Timing-Chain Tensioner Sleeve 4 mm","description":"\u003cp\u003eTiming-chain tensioner sleeve for VW VR6 turbo conversions using compression-reduction plates.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSleeve material: stainless steel\u003c\/li\u003e\u003cli\u003eSleeve thickness: 4 mm\u003c\/li\u003e\u003cli\u003eIncludes two copper gaskets, 1 mm each\u003c\/li\u003e\u003cli\u003eTotal thickness: 6 mm\u003c\/li\u003e\u003cli\u003eScope of delivery: 1 sleeve and 2 copper gaskets\u003c\/li\u003e\u003cli\u003eMade in Germany\u003c\/li\u003e\u003c\/ul\u003e\u003cdiv data-wp-safety=\"general-v1\"\u003e\u003chr\u003e\u003ch3\u003eSafety and usage instructions\u003c\/h3\u003e\u003cp\u003eBefore installation and use, please read the \u003ca href=\"\/en\/pages\/allgemeine-sicherheits-und-gebrauchshinweise\"\u003egeneral safety and usage instructions\u003c\/a\u003e and the product-specific information in this description.\u003c\/p\u003e\u003c\/div\u003e","brand":"WP-Spezialteile","offers":[{"title":"Default Title","offer_id":49899927503188,"sku":"55951426","price":8.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/0063\/7780\/files\/kettenspanner-mit-logo-Kopie2.jpg?v=1742175560"},{"product_id":"vw-vr6-kettenspannerhulse-edelstahl-in-5mm","title":"VW VR6 Stainless Steel Timing-Chain Tensioner Sleeve 5 mm","description":"\u003cp\u003eTiming-chain tensioner sleeve for VW VR6 turbo conversions using compression-reduction plates.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSleeve material: stainless steel\u003c\/li\u003e\u003cli\u003eSleeve thickness: 5 mm\u003c\/li\u003e\u003cli\u003eIncludes two copper gaskets, 1 mm each\u003c\/li\u003e\u003cli\u003eTotal thickness: 7 mm\u003c\/li\u003e\u003cli\u003eScope of delivery: 1 sleeve and 2 copper gaskets\u003c\/li\u003e\u003cli\u003eMade in Germany\u003c\/li\u003e\u003c\/ul\u003e\u003cdiv data-wp-safety=\"general-v1\"\u003e\u003chr\u003e\u003ch3\u003eSafety and usage instructions\u003c\/h3\u003e\u003cp\u003eBefore installation and use, please read the \u003ca href=\"\/en\/pages\/allgemeine-sicherheits-und-gebrauchshinweise\"\u003egeneral safety and usage instructions\u003c\/a\u003e and the product-specific information in this description.\u003c\/p\u003e\u003c\/div\u003e","brand":"WP-Spezialteile","offers":[{"title":"Default Title","offer_id":49899930976596,"sku":"55951427","price":8.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/0063\/7780\/files\/kettenspannerhlse_ef85fc69-5179-49e3-9be3-9615f3b7c7b2.jpg?v=1742175560"},{"product_id":"vw-v5-zylinderkopfdichtung-fur-aqn-azx-verdichtungsreduzierung-9-84-1","title":"VW V5 Cylinder Head Gasket for AQN AZX with Compression Reduction 9.84:1","description":"\u003cp\u003e\u003cstrong\u003eCompression-reducing multi-layer steel cylinder head gasket for V5 engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpecial turbo cylinder head gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e WP-Spezialteile \/ Reinz 61-36100-00\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Multi-layer steel\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTotal thickness:\u003c\/strong\u003e 1.6 mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine codes:\u003c\/strong\u003e AQN, AZX\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompression ratio:\u003c\/strong\u003e 9.84:1 (standard 10.8:1)\u003c\/p\u003e\u003cp\u003eThis special complete-solution cylinder head gasket for turbo and supercharger conversions already integrates a thicker, coated intermediate layer and compression reduction.\u003c\/p\u003e\u003cp\u003eThe new compression ratio is 9.84:1. Metal gaskets are characterised by a very long service life.\u003c\/p\u003e\u003cp\u003eThis version is considerably easier to install than two cylinder head gaskets with a spacer plate, saving you the cost of two gaskets and a spacer plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning: only for engines with a turbocharger or supercharger!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen converting to a turbocharger or supercharger, the compression ratio must be reduced. This can be achieved using special pistons or a spacer plate. This allows significantly higher boost pressures and power outputs. Under normal compression ratios, the original pistons may not withstand the resulting temperatures or may operate at the knock limit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAvailable from us in different thicknesses:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.6 mm = 9.84:1\u003c\/li\u003e\u003cli\u003e2.1 mm = 9.43:1\u003c\/li\u003e\u003cli\u003e2.6 mm = 9.05:1\u003c\/li\u003e\u003cli\u003e3.1 mm = 8.71:1\u003c\/li\u003e\u003cli\u003e3.6 mm = 8.39:1\u003c\/li\u003e\u003cli\u003e4.6 mm = 7.83:1\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMade in Germany\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv data-wp-safety=\"general-v1\"\u003e\u003chr\u003e\u003ch3\u003eSafety and usage instructions\u003c\/h3\u003e\u003cp\u003eBefore installation and use, please read the \u003ca href=\"\/en\/pages\/allgemeine-sicherheits-und-gebrauchshinweise\"\u003egeneral safety and usage instructions\u003c\/a\u003e and the product-specific information in this description.\u003c\/p\u003e\u003c\/div\u003e","brand":"WP-Spezialteile","offers":[{"title":"Default Title","offer_id":49899992121684,"sku":"74007271","price":107.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/0063\/7780\/files\/1_5d494e89-0526-4045-b8be-c3024db7e18b.jpg?v=1742175599"},{"product_id":"vw-v5-zylinderkopfdichtung-fur-aqn-azx-verdichtungsreduzierung-9-43-1","title":"VW V5 Cylinder Head Gasket for AQN AZX with Compression Reduction 9.43:1","description":"\u003cp\u003e\u003cstrong\u003eCompression-reducing multi-layer steel cylinder head gasket for V5 engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpecial turbo cylinder head gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e WP-Spezialteile \/ Reinz 61-36100-00\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Multi-layer steel\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTotal thickness:\u003c\/strong\u003e 2.1 mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine codes:\u003c\/strong\u003e AQN, AZX\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompression ratio:\u003c\/strong\u003e 9.43:1 (standard 10.8:1)\u003c\/p\u003e\u003cp\u003eThis special complete-solution cylinder head gasket for turbo and supercharger conversions already integrates a thicker, coated intermediate layer and compression reduction.\u003c\/p\u003e\u003cp\u003eThe new compression ratio is 9.43:1. Metal gaskets are characterised by a very long service life.\u003c\/p\u003e\u003cp\u003eThis version is considerably easier to install than two cylinder head gaskets with a spacer plate, saving you the cost of two gaskets and a spacer plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning: only for engines with a turbocharger or supercharger!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen converting to a turbocharger or supercharger, the compression ratio must be reduced. This can be achieved using special pistons or a spacer plate. This allows significantly higher boost pressures and power outputs. Under normal compression ratios, the original pistons may not withstand the resulting temperatures or may operate at the knock limit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAvailable from us in different thicknesses:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.6 mm = 9.84:1\u003c\/li\u003e\u003cli\u003e2.1 mm = 9.43:1\u003c\/li\u003e\u003cli\u003e2.6 mm = 9.05:1\u003c\/li\u003e\u003cli\u003e3.1 mm = 8.71:1\u003c\/li\u003e\u003cli\u003e3.6 mm = 8.39:1\u003c\/li\u003e\u003cli\u003e4.6 mm = 7.83:1\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMade in Germany\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv data-wp-safety=\"general-v1\"\u003e\u003chr\u003e\u003ch3\u003eSafety and usage instructions\u003c\/h3\u003e\u003cp\u003eBefore installation and use, please read the \u003ca href=\"\/en\/pages\/allgemeine-sicherheits-und-gebrauchshinweise\"\u003egeneral safety and usage instructions\u003c\/a\u003e and the product-specific information in this description.\u003c\/p\u003e\u003c\/div\u003e","brand":"WP-Spezialteile","offers":[{"title":"Default Title","offer_id":49899992645972,"sku":"74007557","price":111.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/0063\/7780\/files\/1_e5dc8053-7689-4eba-bbe8-ddc4233051f5.jpg?v=1742175600"},{"product_id":"vw-v5-zylinderkopfdichtung-fur-aqn-azx-verdichtungsreduzierung-9-05-1","title":"VW V5 Cylinder Head Gasket for AQN AZX with Compression Reduction 9.05:1","description":"\u003cp\u003e\u003cstrong\u003eCompression-reducing multi-layer steel cylinder head gasket for V5 engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpecial turbo cylinder head gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e WP-Spezialteile \/ Reinz 61-36100-00\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Multi-layer steel\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTotal thickness:\u003c\/strong\u003e 2.6 mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine codes:\u003c\/strong\u003e AQN, AZX\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompression ratio:\u003c\/strong\u003e 9.05:1 (standard 10.8:1)\u003c\/p\u003e\u003cp\u003eThis special complete-solution cylinder head gasket for turbo and supercharger conversions already integrates a thicker, coated intermediate layer and compression reduction.\u003c\/p\u003e\u003cp\u003eThe new compression ratio is 9.05:1. Metal gaskets are characterised by a very long service life.\u003c\/p\u003e\u003cp\u003eThis version is considerably easier to install than two cylinder head gaskets with a spacer plate, saving you the cost of two gaskets and a spacer plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning: only for engines with a turbocharger or supercharger!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen converting to a turbocharger or supercharger, the compression ratio must be reduced. This can be achieved using special pistons or a spacer plate. This allows significantly higher boost pressures and power outputs. Under normal compression ratios, the original pistons may not withstand the resulting temperatures or may operate at the knock limit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAvailable from us in different thicknesses:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.6 mm = 9.84:1\u003c\/li\u003e\u003cli\u003e2.1 mm = 9.43:1\u003c\/li\u003e\u003cli\u003e2.6 mm = 9.05:1\u003c\/li\u003e\u003cli\u003e3.1 mm = 8.71:1\u003c\/li\u003e\u003cli\u003e3.6 mm = 8.39:1\u003c\/li\u003e\u003cli\u003e4.6 mm = 7.83:1\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMade in Germany\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv data-wp-safety=\"general-v1\"\u003e\u003chr\u003e\u003ch3\u003eSafety and usage instructions\u003c\/h3\u003e\u003cp\u003eBefore installation and use, please read the \u003ca href=\"\/en\/pages\/allgemeine-sicherheits-und-gebrauchshinweise\"\u003egeneral safety and usage instructions\u003c\/a\u003e and the product-specific information in this description.\u003c\/p\u003e\u003c\/div\u003e","brand":"WP-Spezialteile","offers":[{"title":"Default Title","offer_id":49899992842580,"sku":"74007598","price":116.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/0063\/7780\/files\/1_d85152f8-9ecf-4477-a35f-f378305807e7.jpg?v=1742175600"},{"product_id":"vw-v5-zylinderkopfdichtung-fur-aqn-azx-verdichtungsreduzierung-8-71-1","title":"VW V5 Cylinder Head Gasket for AQN AZX with Compression Reduction 8.71:1","description":"\u003cp\u003e\u003cstrong\u003eCompression-reducing multi-layer steel cylinder head gasket for V5 engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpecial turbo cylinder head gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e WP-Spezialteile \/ Reinz 61-36100-00\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Multi-layer steel\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTotal thickness:\u003c\/strong\u003e 3.1 mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine codes:\u003c\/strong\u003e AQN, AZX\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompression ratio:\u003c\/strong\u003e 8.71:1 (standard 10.8:1)\u003c\/p\u003e\u003cp\u003eThis special complete-solution cylinder head gasket for turbo and supercharger conversions already integrates a thicker, coated intermediate layer and compression reduction.\u003c\/p\u003e\u003cp\u003eThe new compression ratio is 8.71:1. Metal gaskets are characterised by a very long service life.\u003c\/p\u003e\u003cp\u003eThis version is considerably easier to install than two cylinder head gaskets with a spacer plate, saving you the cost of two gaskets and a spacer plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning: only for engines with a turbocharger or supercharger!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen converting to a turbocharger or supercharger, the compression ratio must be reduced. This can be achieved using special pistons or a spacer plate. This allows significantly higher boost pressures and power outputs. Under normal compression ratios, the original pistons may not withstand the resulting temperatures or may operate at the knock limit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAvailable from us in different thicknesses:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.6 mm = 9.84:1\u003c\/li\u003e\u003cli\u003e2.1 mm = 9.43:1\u003c\/li\u003e\u003cli\u003e2.6 mm = 9.05:1\u003c\/li\u003e\u003cli\u003e3.1 mm = 8.71:1\u003c\/li\u003e\u003cli\u003e3.6 mm = 8.39:1\u003c\/li\u003e\u003cli\u003e4.6 mm = 7.83:1\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMade in Germany\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv data-wp-safety=\"general-v1\"\u003e\u003chr\u003e\u003ch3\u003eSafety and usage instructions\u003c\/h3\u003e\u003cp\u003eBefore installation and use, please read the \u003ca href=\"\/en\/pages\/allgemeine-sicherheits-und-gebrauchshinweise\"\u003egeneral safety and usage instructions\u003c\/a\u003e and the product-specific information in this description.\u003c\/p\u003e\u003c\/div\u003e","brand":"WP-Spezialteile","offers":[{"title":"Default Title","offer_id":49899993006420,"sku":"74007905","price":121.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/0063\/7780\/files\/1_0cbe7dcd-ab99-4351-bbc7-08aa1193f246.jpg?v=1742175601"},{"product_id":"vw-v5-zylinderkopfdichtung-fur-aqn-azx-verdichtungsreduzierung-8-39-1","title":"VW V5 Cylinder Head Gasket for AQN AZX with Compression Reduction 8.39:1","description":"\u003cp\u003e\u003cstrong\u003eCompression-reducing multi-layer steel cylinder head gasket for V5 engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpecial turbo cylinder head gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e WP-Spezialteile \/ Reinz 61-36100-00\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Multi-layer steel\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTotal thickness:\u003c\/strong\u003e 3.6 mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine codes:\u003c\/strong\u003e AQN, AZX\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompression ratio:\u003c\/strong\u003e 8.39:1 (standard 10.8:1)\u003c\/p\u003e\u003cp\u003eThis special complete-solution cylinder head gasket for turbo and supercharger conversions already integrates a thicker, coated intermediate layer and compression reduction.\u003c\/p\u003e\u003cp\u003eThe new compression ratio is 8.39:1. Metal gaskets are characterised by a very long service life.\u003c\/p\u003e\u003cp\u003eThis version is considerably easier to install than two cylinder head gaskets with a spacer plate, saving you the cost of two gaskets and a spacer plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning: only for engines with a turbocharger or supercharger!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen converting to a turbocharger or supercharger, the compression ratio must be reduced. This can be achieved using special pistons or a spacer plate. This allows significantly higher boost pressures and power outputs. Under normal compression ratios, the original pistons may not withstand the resulting temperatures or may operate at the knock limit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAvailable from us in different thicknesses:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.6 mm = 9.84:1\u003c\/li\u003e\u003cli\u003e2.1 mm = 9.43:1\u003c\/li\u003e\u003cli\u003e2.6 mm = 9.05:1\u003c\/li\u003e\u003cli\u003e3.1 mm = 8.71:1\u003c\/li\u003e\u003cli\u003e3.6 mm = 8.39:1\u003c\/li\u003e\u003cli\u003e4.6 mm = 7.83:1\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMade in Germany\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv data-wp-safety=\"general-v1\"\u003e\u003chr\u003e\u003ch3\u003eSafety and usage instructions\u003c\/h3\u003e\u003cp\u003eBefore installation and use, please read the \u003ca href=\"\/en\/pages\/allgemeine-sicherheits-und-gebrauchshinweise\"\u003egeneral safety and usage instructions\u003c\/a\u003e and the product-specific information in this description.\u003c\/p\u003e\u003c\/div\u003e","brand":"WP-Spezialteile","offers":[{"title":"Default Title","offer_id":49899993235796,"sku":"74008145","price":126.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/0063\/7780\/files\/1_d447a162-506f-4283-9704-b3a620a828bd.jpg?v=1742175602"},{"product_id":"vw-v5-zylinderkopfdichtung-fur-aqn-azx-verdichtungsreduzierung-7-83-1","title":"VW V5 Cylinder Head Gasket for AQN AZX with Compression Reduction 7.83:1","description":"\u003cp\u003e\u003cstrong\u003eCompression-reducing multi-layer steel cylinder head gasket for V5 engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSpecial turbo cylinder head gasket.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e WP-Spezialteile \/ Reinz 61-36100-00\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Multi-layer steel\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTotal thickness:\u003c\/strong\u003e 4.6 mm\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine codes:\u003c\/strong\u003e AQN, AZX\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCompression ratio:\u003c\/strong\u003e 7.83:1 (standard 10.8:1)\u003c\/p\u003e\u003cp\u003eThis special complete-solution cylinder head gasket for turbo and supercharger conversions already integrates a thicker, coated intermediate layer and compression reduction.\u003c\/p\u003e\u003cp\u003eThe new compression ratio is 7.83:1. Metal gaskets are characterised by a very long service life.\u003c\/p\u003e\u003cp\u003eThis version is considerably easier to install than two cylinder head gaskets with a spacer plate, saving you the cost of two gaskets and a spacer plate.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarning: only for engines with a turbocharger or supercharger!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen converting to a turbocharger or supercharger, the compression ratio must be reduced. This can be achieved using special pistons or a spacer plate. This allows significantly higher boost pressures and power outputs. Under normal compression ratios, the original pistons may not withstand the resulting temperatures or may operate at the knock limit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAvailable from us in different thicknesses:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003e1.6 mm = 9.84:1\u003c\/li\u003e\u003cli\u003e2.1 mm = 9.43:1\u003c\/li\u003e\u003cli\u003e2.6 mm = 9.05:1\u003c\/li\u003e\u003cli\u003e3.1 mm = 8.71:1\u003c\/li\u003e\u003cli\u003e3.6 mm = 8.39:1\u003c\/li\u003e\u003cli\u003e4.6 mm = 7.83:1\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eMade in Germany\u003c\/strong\u003e\u003c\/p\u003e\u003cdiv data-wp-safety=\"general-v1\"\u003e\u003chr\u003e\u003ch3\u003eSafety and usage instructions\u003c\/h3\u003e\u003cp\u003eBefore installation and use, please read the \u003ca href=\"\/en\/pages\/allgemeine-sicherheits-und-gebrauchshinweise\"\u003egeneral safety and usage instructions\u003c\/a\u003e and the product-specific information in this description.\u003c\/p\u003e\u003c\/div\u003e","brand":"WP-Spezialteile","offers":[{"title":"Default Title","offer_id":49899993760084,"sku":"74008149","price":132.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0902\/0063\/7780\/files\/1_352be219-ff85-4737-9200-f03a64d927a4.jpg?v=1742175603"}],"url":"https:\/\/wp-spezialteile.com\/en\/collections\/vr5-komplettdichtung.oembed","provider":"WP-Spezialteile","version":"1.0","type":"link"}